The Structural Form Of Planar Thrust Bearings

A flat bearing consists of a flat cage component with needle rollers, cylindrical rollers, or steel balls, and a flat washer. Plain bearings are divided into plain bearings with needle rollers and plain bearings with balls.
The AXK type thrust needle roller and cage assembly is the main component of the thrust needle roller bearing. The cage is cold-drawn from steel plate, while the small-sized cage is made of plastic and uses G2 grade high-precision rolling needles to ensure uniform load distribution. The thrust cylindrical roller and cage assembly is similar to the AXK type assembly and can withstand high thrust loads.
Produce inch thrust needle cage components and supporting gaskets, such as TC, TWA, TWB, TWC and other series.
The AXW type thrust needle bearing consists of an AXK type thrust needle and cage assembly and a stamped center sleeve.
The main components of the AX type thrust needle bearing are the AXK type component and thrust washer, which are connected together by the control ring.